I-Beam Cable Trolley M-Line Series 0330

I-Beam Festoon Systems

The fastest and strongest round or flat cable trolleys of the M-Line. Made of hot-dipped galvanized steel for average speeds and higher loads with four-point suspension.

Main applications

Bridge cranes
Conveyor systems
Electric hoists
Transport systems

Specification

Travel speed max. ¹⁾: 150 m/min [492.1 ft/min]
Load capacity/trolley max. ¹⁾: 200 kg [440.9 lb]
Main rollers diameter: 63 mm [2.48"]
Ambient temperature: -30° ... +80° C [-22° F to 176° F]
Applications: indoor / outdoor
I-beam: parallel flange / tapered flange

¹⁾ depending on roller size/ roller material

Downloads

MAL0300-0002-EN Festoon Systems for I-Beams - 0320, 0325, 0330

PDF | 1.7 MB

Language: English

Document type: Operation Manuals

Download

FAQ

When is the Cable Trolley M-Line Series 0330 used?

The I-Beam Festoon System M-Line Series 0330 is for medium and large flat or round cable packages. Mainly used on standard overhead cranes, to supply energy for hoists and similar applications, and whenever a modular and robust system is required.

How does an I-Beam system work?

Cable trolleys are installed on an I-beam. The cable package is installed on the cable trolleys in cable loops. The system is moved by a towing trolley, which is fixed to the energy consuming equipment.

How is the energy and data transmitted?

Energy and data are transmitted via flexible flat or round cable packages. Any cable used must be suitable for use in a festoon system. Various types of cable with PVC, PUR or rubber insulation are available.

What is the typical track profile?

The system is typically operating on tapered or parallel I-beams. Usually standardised I-beam sizes are used.

Are I-Beam Festoon Systems for indoor or outdoor use?

I-Beam Festoon Systems can be used both indoors and outdoors.

What are the typical wear parts?

Typical wear parts are the rollers of the running gears and the buffers on the trolleys. The rubber damping devices used in a system are also subject to wear.